Hi,
I am receiving the following message repeatedly:
"L2ALD_MAC_MOVE_EXCEEDED_BD_ACTION_NONE: Limit on MAC moves exceeded at VLAN vlan-trust+1for MAC 00:ae:45:54:a0:6e moved from interface ge-0/0/2.0 to interface ge-0/0/5.0;Mac move limit is 0. No action ( Forwarding the packet)"
I cannot find this MAC address within my show arp / dhcp server bind tables. I have seen in the forums that this is possibly a loop.
Not finding anywere in the SRX where i can set mac-move limits and actions. Is this even something i should worry about?
ge-0/0/2 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
ge-0/0/5 {
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
Repeats:
Mon Aug 20 21:19:18 2018 vlan_name vlan-trust+1 mac 00:ae:45:54:a0:6e was moved from ge-0/0/5.0 to ge-0/0/2.0 with flags: 0x2101f
Mon Aug 20 21:19:19 2018 vlan_name vlan-trust+1 mac 00:ae:45:54:a0:6e was moved from ge-0/0/2.0 to ge-0/0/5.0 with flags: 0x2101f
*comes up as no vendor*
Global Configuration:
MAC aging interval : 300
MAC learning : Enabled
MAC statistics : Disabled
MAC limit Count : 16383
MAC limit hit : Disabled
MAC packet action drop: Disabled
LE aging time : 1200
LE VLAN aging time : 1200
Global Mode : Switching
Routing instance VLAN name Tag Interfaces
default-switch vlan-phones 100
ge-0/0/3.0
ge-0/0/4.0
ge-0/0/5.0*
default-switch vlan-ss 3
ge-0/0/3.0
ge-0/0/4.0
ge-0/0/5.0*
default-switch vlan-trust 1
ge-0/0/1.0*
ge-0/0/2.0*
ge-0/0/3.0
ge-0/0/4.0
ge-0/0/5.0*
ge-0/0/6.0
ge-0/0/7.0
When i blocked the MAC address, IP phones at another location stopped working. Anything i could try would be helpful