Hi
I configure radius accouting on EX2300. EX2300 will send radius accouting to NAC device but frame-ip-address attribute is null.
As document "https://www.juniper.net/documentation/en_US/junos/topics/concept/802-1x-pnac-accounting-understanding.html" It shown "The Framed-IP-Address attribute is sent only if a valid DHCP binding exists for the host in the DHCP snooping table"
DHCP server was enable on EX2300 switch and I also try to enable DHCP Snooping.
But framed-IP-Address attribute still not show. Here is my configuration
set vlans VLAN27 vlan-id 27
set vlans VLAN27 l3-interface irb.27
set vlans VLAN27 forwarding-options dhcp-security group Trust_VLAN27 overrides trusted
set vlans VLAN27 forwarding-options dhcp-security group Trust_VLAN27 interface ge-0/0/0.0
set vlans VLAN27 forwarding-options dhcp-security group Trust_VLAN27 interface ge-0/0/1.0
set vlans VLAN27 forwarding-options dhcp-security group Trust_VLAN27 interface ge-0/0/10.0
Is it correct?
Do you have any recommended command for verify DHCP snooping