Hello,
I upgrade my QFX 5100 to JunOS 17.3R3.10
Model: qfx5100-48s-6q
Junos: 17.3R3.10
I create a virtual-chassis between 2 QFX.
At the beggining i had some trouble with vc-port but now it's OK.
show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
0/48 Configured 5 Up 40000 1 vcp-255/0/48
0/50 Configured 5 Up 40000 1 vcp-255/0/50
fpc1:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
0/48 Configured 5 Up 40000 0 vcp-255/0/48
0/50 Configured 5 Up 40000 0 vcp-255/0/50
But i have one member which is in "Linecard" mode:
how virtual-chassis
Preprovisioned Virtual Chassis
Virtual Chassis ID: 6447.7c9c.137f
Virtual Chassis Mode: Mixed
Mstr Mixed Route Neighbor List
Member ID Status Serial No Model prio Role Mode Mode ID Interface
0 (FPC 0) Prsnt TAXXXXX qfx5100-48s-6q 129 Master* Y VC 1 vcp-255/0/48
1 vcp-255/0/50
1 (FPC 1) Inactive TAXXXXXX qfx5100-48s-6q 129 Linecard N VC 0 vcp-255/0/48
0 vcp-255/0/50
show virtual-chassis
preprovisioned;
no-split-detection;
member 0 {
role routing-engine;
serial-number TAXXXX;
}
member 1 {
role routing-engine;
serial-number TAXXXXX;
}
I want to have routing-engine for the 2 QFX. (master/backup)
Do you have an idea ?
Thks