Hi all,
1-) For the following constant log message on the 4200ex in vc, there is a https://kb.juniper.net/InfoCenter/index?page=content&id=KB24127&actp=search&viewlocale=en_US&searchid=1377360174814
Any one has any ideas for investigating the cause?
snmpd[1329]: LIBJSNMP_NS_LOG_WARNING: WARNING: AgentX session, /var/run/mib2d-11, noticed request timeout. Request PDUs: 32159452, Response PDUs: 32155703, Request variables: 459846547, Response variables: 459709416, Average response time: 858.70, Maximum response time: 32218.01
2-) Couldn't find any resource about the following chassisd log...Can I ask about what missing this VC as there is no alarm on system and chassis?
fru_is_present: out of range slot 0 for
fpm_get_sys_led: FPM display module missing
fru_is_present: out of range slot 0 for
fpm_get_sys_led: FPM display module missing
3-) The following snmpd log messages are happening all the time...never stop! How to address this issue. And another qs is what reason could be that the vlan l3 interface is engaged to snmp stuff?
snmpd[1329]: SNMPD_AUTH_FAILURE: nsa_log_community: unauthorized SNMP community from 10.232.232.20 to 10.30.85.1 (MH49otr_n4hQ)
Ip address of 10.30.85.1 is on the 4200ex VC.
>show configuration | display set | match 10.30.85.1
set interfaces vlan unit 85 family inet address 10.30.85.1/24
>ping 10.232.232.20
64 bytes from 10.232.232.20 : icmp_seq=0 ttl=117 time=37.686 ms
64 bytes from 10.232.232.20 : icmp_seq=1 ttl=117 time=37.522 ms
64 bytes from 10.232.232.20 : icmp_seq=2 ttl=117 time=38.427 ms
64 bytes from 10.232.232.20 : icmp_seq=3 ttl=117 time=37.404 ms
64 bytes from 10.232.232.20 : icmp_seq=4 ttl=117 time=37.301 ms