Hi,
I unpacked today a brandnew EX3300-24P but it did not start. I connect a serial cable and got this output.
U-Boot 1.1.6 (Jun 4 2012 - 01:56:18)
Board: EX3300-24P 5.15
EPLD: Version 04.130327 (0x10)
DRAM: Initializing (1GB)
Flash: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices...
Root Hub 0: 2 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... data abort
pc : [<00237a4c>] lr : [<00211810>]
sp : 801fdbb4 ip : 0029a802 fp : 00000001
r10: 00000000 r9 : 0029a800 r8 : 001fffb4
r7 : 0028c550 r6 : 0029a740 r5 : 00001a52 r4 : 0029a740
r3 : 200000d3 r2 : 200000d3 r1 : 0029a77f r0 : 0029a740
Flags: nzCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
Switch boots around 3 times and stops. Any idea how to fix ? Thank you for your help.
Regards, Daniel