Hi,
We have Model: ex4300-48p Junos: 18.1R3-S6.1
While i am changing interface range i am getting below error. please suggest, how to fix
SWITCH# run show configuration |display set |match interface-range
set interfaces interface-range SERVER-PORTS member-range ge-0/0/12 to ge-0/0/45
set interfaces interface-range SERVER-PORTS unit 0 family ethernet-switching interface-mode access
set interfaces interface-range ALL-RSTP-ENABLE member-range ge-0/0/12 to ge-0/0/45
{master:0}[edit]
SWITCH# delete interfaces interface-range SERVER-PORTS member-range ge-0/0/12 to ge-0/0/45
{master:0}[edit]
SWITCH# set interfaces interface-range SERVER-PORTS member-range ge-0/0/12 to ge-0/0/43
{master:0}[edit]
SWITCH# commit check
[edit protocols rstp]
'interface'
XSTP : Interface ge-0/0/44 is not enabled for Ethernet Switching
error: configuration check-out failed
--> Once this error get clear i will push below config
set interfaces ge-0/0/44 unit 0 family inet no-redirects
set interfaces ge-0/0/44 unit 0 family inet address 10.12.17.3/30
set protocols ospf area 0.0.0.0 interface ge-0/0/44.0