hi all, I have issue when powerd up EX4200, poe is configured on all ports but seems that opeational status is off, this is config:
set poe interface all set poe interface all telemetries set poe interface ge-0/0/0 disable set poe interface ge-0/0/1 disable set poe interface ge-0/0/2 disable set poe interface ge-0/0/10 disable set poe interface ge-0/0/11 disable
output of show commands:
# run show poe interface
Interface Admin Oper Max Priority Power Class
status status power consumption
ge-0/0/0 Disabled Disabled 0.0W Low 0.0W not-applicable
ge-0/0/1 Disabled Disabled 0.0W Low 0.0W not-applicable
ge-0/0/2 Disabled Disabled 0.0W Low 0.0W not-applicable
ge-0/0/3 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/4 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/5 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/6 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/7 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/8 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/9 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/10 Disabled Disabled 0.0W Low 0.0W not-applicable
ge-0/0/11 Disabled Disabled 0.0W Low 0.0W not-applicable
ge-0/0/12 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/13 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/14 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/15 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/16 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/17 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/18 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/19 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/20 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/21 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/22 Enabled OFF 15.4W Low 0.0W not-applicable
ge-0/0/23 Enabled OFF 15.4W Low 0.0W not-applicable
# run show poe controller
Controller Maximum Power Guard Management Status Lldp
index power consumption band Priority
0** 410.00W 0.00W 0W Static AF_MODE Disabled
# run show poe telemetries
Interface Sl No Timestamp Power Voltage
ge-0/0/4 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/5 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/6 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/7 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/8 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/9 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/12 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/13 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/14 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/15 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/16 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/17 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/18 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/19 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/20 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/21 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/22 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
ge-0/0/23 1 03-13-2014 10:06:05 UTC 0.0W 51.6V
any idesa why operational status is off? hoiw can I convert port to supply 24V instead 51.6V? 51.6V might be to high for APs