syslog and SNMP traps failing
Hello, I am not receiving any syslog or SNMP traps on my Kiwi Syslog server.Specifically I am trying to receive syslog or traps of when someone logs in successfully or unsuccessfully.However when I...
View ArticleEX-4200 does not support nested firewall rules?
Hi, all, according to documentation, nested firewall rule is supported on EX-4200 platform, however it does not seem to be the case, any idea? EX4200-24t# set firewall family inet filter filter1 term...
View ArticleDomain bridge ex2400
Hi, I need to connect one router with 1g interface to my mx having only 10g interfaces. I thouht using my ex switch and creating a domaine using one 1g and 10g unused interfaces to do so. Does a simple...
View ArticleConfiguration Assistance - QFX10008 to EX4300 using JNP-QSFP-DAC-5M
Hi all,I'm trying to connect a QFX10008 to an EX4300 switch using a Passive DAC as uplink port and not as vcp.I already found out that the default behavior for a 4x40G pic in the EX4300 is configured...
View ArticleInter-switch isolated vlan in PVLAN?
Hello Experts I do not understand the concept of inter-switch isolated VLAN VS isloated VLAN in PVLAN. When isolated VLAN member cannot communicate to other isolated VLAN member then why to carry...
View ArticleEX4200 Port Security
I currently have an EX4200 with the enabled ports locked down to the MAC or MACs of the workstations on them with the "allowed-mac and mac-limit". I know have users with laptops wanting to move around...
View ArticleConfiguring a remote loop back on an interface.
Hello All, I've been trying to create a remote loop back on a 10G interface on an EX4550. The 4550 is in a remote location and I'm connected it to it via leased 10g ethernet circuit. I want to create a...
View ArticleEX Series PR 490932
hello community, yesterday I was setting up some ports (20,21) from an EX3300 running 12.3 to be used by the Mgmt Vlan. I was getting Layer 2 connectivity between the servers connected to those ports...
View ArticleClik here to view.
EX 2200 switch with EX-1FE-FX SFP module
Good day, all!I have seriouse problem with installing EX-1FE-FX (P\n: 740-021487) SFP-module, and I not shure that my SFP-module is compatibe with my swith. Please, help me to recognise module(see on...
View ArticleTurning on 3300 & 4300 switches without unplugging power cable
Experts, I am wonder if after request system halt is any way to turn on back a switch without unpluging power cable and plugging it back. Was looking on the LCD and buttons but did not find anything....
View Articlefirewall filter based ip address and port
hi all we just bought a bunch of 3200 switches. we need to block traffic based on source/destination address (between vlans) and ports. but it seems only the mac filtering working. any special...
View ArticleIP Accounting?
Do EX switches have some equivalent to Cisco's "ip accounting" function?
View Articlesrx1500 HA Control Port
Hello,due to SRX650 end of sale, we had to lately order 2 SRX1500;those SRX1500 have a dedicated HA Control port with is SFP based so, apparently 1G Copper of Fiber based on the GBIC you order; so, for...
View ArticleSame Vlan on multiple switches EX2200 - guest wifi setup
Hi guys,I am pretty new to the world of networking and especially Juniper switching. I have following situation I need your help with. I have 2 48P EX2200 switches, one SW01 that is fully managed by...
View ArticleMC-LAG down (QFX10K to EX4550)
HiI'm trying to setup MC-LAG port between two core QFX10008 switches to an access EX4550 switch.ICCP is up, other mc-lags to other access switches are up (QFX5100),i'm attaching configuration in a hope...
View ArticleStorm control action-shutdown on QFX
I have come across a commit error when adding the 'action-shutdown' option to a storm control profile. {master:0}[edit interfaces xe-2/0/8]paulh@LAB1# commit check [edit interfaces xe-2/0/8...
View ArticleFormat install on Virtual Chassis Master
My VC master has booted from the backup partition after a power failure. I can't get it to boot into the primary partition:request system snapshot media internal slice alternaterequest system reboot...
View Articleifd aeX no kernel link-speed
Hia quick question please, does anyone know what's the meaning\solution for those logs? Sep 24 09:22:23 sw1.hfa.RE1 dcd[4425]: parse_mix_rate_parent_ae : ifd ae0 no kernel link-speedSep 24 09:22:23...
View ArticleEVPN VxLAN
I have an testlab with Openstack and mx80 (16.1).Two vrf instances - one to organize overlay network, one for vxlan tenants, and one evpn instance for vxlan termination using pim sparse...
View Articleconfiguring hardware TCAM
Can it be verified if the Open-flow 1.3 client in the QFX5100 switches supports configuring hardware TCAM or does it use software tables?
View Article