Disable InterVlan routing
I have three VLANs configured in my ex8208Vlan1, Vlan2, and Vlan3All VLANs are able to communicate with each other which is wrong.All VLANs are configured with l3.interface. My Requirements:1. Can I...
View ArticleClik here to view.
QFX 5100 Transit Traffic processed by Loopback Filters
We are experiencing a very odd issue with our QFX5100 switching and the routing tables. Issue:Ubuntu Test Server (96.126.81.60) making any TCP or UDP connection to off-net services is unable to...
View ArticleDOT1x and Mac authentication for PC and Phone
Hey Guyshas anyone had this issue before. I have a switch EX4200 and a phone and PC connected to an access port. the PC uses dot1x authentication while the phone uses mac address to authenticate. Both...
View Articlemac-move configuration, is it possible to exclude an interface ?
Hi all,I'm trying to setup mac-move limitation with below requirements.. When a mac-address flaps between 2 access interfaces (PC,Phone,etc) to shutdown one of the interfaces.. Exclude the interfaces...
View ArticleAggregation not working for EX3400
Hi guys, I have an unusual issue. I am configuring link aggregation on my EX3400 for the first time. I am experiecing the following issue. Can someone please have a look and tell me what am I missing?...
View ArticleEX4300 DHCP not working for phone vlan
I have an EX4300 setup with the following dhcp relay configuration. This switch is setup as a L3 switch. forwarding-options { storm-control-profiles default { all; } dhcp-relay { server-group {...
View ArticleJuniper EX-4200 " Your Session has expired. Click OK to redirect to login page."
Hi,I am having an issue with J-Web where the second I log in it expires my session immediately.nothing works! tried to open permissions for var folder,tried to upgrade didn't work.tried to change the...
View Articleknobs for proxy-arp
Hi folks, Can anyone help me understand "restricted" proxy-arp? Is it like the arp responses are made if the source and actual IP address are on unlike subnets? Is this understanding right? Thanks!
View ArticleRegarding telemetry logging
PoE devices were inducted to EX switch, there are some issues around establishing connectivity but unfortunately, I don't see any telemetry logs even though it is enabled. Is there anything else to...
View ArticleJuniper loopback interface & acl or firewall filter
Hi all, I realize whenever i configure a firewall filter on the local loopback interface that allows SSH, Telnet from certain sourceIP (e.g. sourceIP-A) only , i lose the ability to PING to the switch...
View ArticleEX4300 Mgmt Interface (me0)
Hello all, I'm currently in the process of upgrading my EX-4200's to EX-4300's, but I'm running into a problem I'm wondering anyone else has seen. The Mgmt Interface on my EX-4300 connects to a media...
View ArticleMulticasting to support VOIP paging
I have an Allworx VOIP PBX system located at our central site. It uses multicast to allow a phone to page a group of phones. This works correctly on the local network. We have multiple remote sites...
View ArticleProper steps to downgrade a virtual-chassis
Hi all, I am doing some testing and require to downgrade my virtual chassis from 17.4 to 17.3.NSSU can't work for downgrade.Been googling around but i am not able to find the right steps to properly...
View ArticleDAC between a EX3400 and a EX2300 NOT WORKING
Hi, I just put a EX-SFP-10GE-DAC-5M between a EX3400 (15.1X53-D52) and a EX2300 (15.1X53-D58.3) and it's not working.The green LED under the SFP are continuously and do not flash.We should do a simple...
View ArticleClik here to view.
Virtual chasis intergration with Window servers "switch independant"...
Hi all, I have a pair of qfx5100-48s-6q and virtual-chassis is setup.I have grace switchover , nonstop routing and nonstop bridging enabled.I have a window server with 2 nic ports connected to each...
View ArticleDAC between a EX3400 and a EX2300 NOT WORKING
Hi, I just put a EX-SFP-10GE-DAC-5M between a EX3400 (15.1X53-D52) and a EX2300 (15.1X53-D58.3) and it's not working.The green LED under the SFP are continuously and do not flash.We should do a simple...
View ArticlePVLAN config for EX3400 (ELS)
Hi, I have the following config for pvlan on EX3300. Please let me know how I can implement the same on EX3400 as it has ELS and there is some difference. Thanks vlan100 { description "Primary VLAN";...
View Articleold messages on QFX
Hi All,How to grap old all messages after rebooting the QFX VC? ThxArix
View ArticleIPFIX export on QFX10002
Hello ;We have as our ASBR 3 qfx10002-36q running Junos: 17.3R3-S1.5 and I want to export flow IPFIX to a serverNote that, the traffic that we want to export flows comes from interfaces belongs to...
View ArticleEX 2300 native vlan
Experts, Migrated config from EX2200 to EX2300unit 0 {family ethernet-switching {interface-mode trunk;vlan {members [ 1-3 5 10 20-25 40 50 60 80 90-91 93 95-96 98 101-102 115 150 155 170 180 194...
View Article