SSH via Juniper EX808 is slow
Hi all. I have this case like that. From my Core-SW (EX8208), I have a lot of interfaces (including interface vlan and L3 interfaces). I have l3-interface vlan.13, and a server 172.18.13.41. If I ssh...
View ArticleRedwave gBic on a EX4600 - ??
We have a EX4600 and are trying to use a 10g Redwave gbic, has anyone tried them before, will they work.? I know the 1g works on our EX2200 switches. Thanks
View ArticleEX2200 8021p Classification Issue
I have two EX2200 switches with identical configurations running 12.3R9.4. On switch A the assured-forwarding and expedited-forwarding queues enumerate when two SIP endpoints on the switch initiate a...
View ArticleJuniper EX4200 QinQ
Hello,Could you please share your experience configuration QinQ on EX series, I want configure QinQ on EX4200, same as alreday has on my Cisco 3750:interface GigabitEthernet1/1/2description...
View ArticleVirtual Chassis with two EX2200 no network access at backup switch
Hi all,I configured a Virtual Chassis with two EX2200 switches. The master switch was already in use and I added the backup switch to the rack. I have used the uplink ports 0 and 1 at both switches to...
View ArticleClik here to view.
vstp on ex4600
Hi all,I am trying to configure rstp on vlan all on ex4600 but showing the sysntax error.But in ex4500 or ex4200 I am able to execute this command. #set protocols vstp vlan allFind the attached screen...
View ArticleRemote Analyzer Not Working??
Im not seeing ANY packets on my Wireshark box using the below config. Doesn't make any sense...Should be easy! WAN-->EX4500-->dedicated pcap trunk-->EX4200-->Wireshark Machine #EX4500...
View ArticleIssues on XFP 10G
Hi,I receive a lot o this issues: Apr 24 11:57:48 FIMX480-re0 fpc5 XETH(5/0) link 4 SFP laser bias current low alarm setApr 24 11:57:54 FIMX480-re0 fpc5 XETH(5/0) link 4 SFP laser bias current low...
View ArticleOptics Interface shows up even though nothing is conneted ?
HelloI have a MX5 which i have connected 3 SPF connected interface, 1 of which is a copper spf.I have noticed that even though nothing is connected to the SPF the interface still shows as up.Has anyone...
View ArticleMinor FPC 0 CPU Temp Sensor Too Warm
Dear All , One of my customer is observing system too warm but system is not showing warm in show chassis environment .Please check and confirm .Current running version is 12.3R11.2 . root> show...
View ArticleIs there a trick to bringing 40Gb ports on EX9200-6QS linecard online
I must be missing the command, but I've searched and cannot find anything related. We have a EX9214 with a EX9200-6QS line card (combo 24x10 and 6x40) card. The 10Gb pics (0 and 1) are online but the...
View ArticleHELP!!!! Radius configured improperly can't login with local accounts
I configured radius on a switch and now I can't login using a local account. I believe I forgot the authentication order statement. Should I be able to login with a local account if I remove the...
View ArticleDevices not connecting in backup VC EX4300
I have 2 virtually chassis EX4300 switches. The master is a non-poe switch and the backup is a poe switch.The device MAC addresses are showing up in the ether-switching table from the master non-poe...
View ArticleEX4200 VC ports not forwarding after unexpected shutdown
Hello everybody,I've a big problem on a mixed EX4200 - EX4550 VC. In brief, after an unexpected shutdown due to power problems of two members of the VC (master and backup, both EX4200 at the same...
View ArticleClik here to view.
Banner
hey guys- i recently switch from cisco to juniper been basically learning on the fly i am trying to create a login banner in juniper and i am having any luck. i used to have this cool banner in cisco....
View ArticleConverting standalone EX to VC master
Hi Folks, We all know how to add or remove a brand new ( no configuration) EX switch to Virual Chassis. My question is, what happens when we want to make our existing ( with configuration in it) EX...
View ArticleVLANs to SRX Configuration
Hi All: I have a VC consisting of an EX4550-32F and an EX4200-48T on which there are two VLANs. These are connected to a SRX240H, each EX vlan with it's own SRX interface.The vlans on the EX are...
View ArticleQinQ with EX4200 and SRX-series
Hi, I have an issue with a service-providor that deliver qinq-interface as a trunk.Earlier we have got an access-port with "switchport mode dot1q-tunnel", but now they want us to make the qinq-trunk...
View ArticleDoes the EX and QFX switches support LDAPS authentication
Hello, I know that the EX and QFX line of switches support user authentication via a TACACS and/or Radius server, but do they support "secure LDAP/LDAPS"? We will be standing up our own LDAPS...
View Articleblink port light command
Hi, Does anybody knows by chance if there is a command to make a port light blink on EX / SRX ? on operational mode / shell mode ?Such as the ethtool command on linux ..
View Article