Wrong permissions intermittetnly when using SSH w/ Tacacs+ EX4300
About 1 out of 4 times when logging into our EX4300's we get severely restricted permissions. The workaround is to log out and log back in. However this proving to be very frustrating. Our EX4300-48...
View ArticleVlan Firewall filters
Thought I'd post this here as I'm not quite understanding the Junos documentation for this feature and working with JTAC hasn't really been helpful. Basically I want to know how vlan firewall filters...
View ArticleMX Virtual Chassis
I have two MX. If each has a single routing engine. Can they be combined into virtual chassis?
View ArticleConfiguring an EX3300 Virtual Chassis
Team, Can we configure two different juniper EX switches in VC. We have 15no of EX3300 switches now configured in VC for two locations and we are in process to buy another juniper EX 3400switches. can...
View ArticleDropped Connections after upgrading to 12.3R12.4 EX2200
Hello, I have an EX2200 Juniper switch that I'm experiencing problems with client connectivity. Even though the workstation nic says it is connected, I cannot ping anyone on the network. The problem...
View Articlevxlan L3 gateway best way to reach rest of the network?
Hi experts.I have followed the IaaS: EVPN and VXLAN Solution and is working as it should.Next step is to decied how the rest of the network should reach the DC. Should I setup a new bgp from each...
View ArticleJuniper EX4550 uses IP of neighbor port as the Source during ping directly...
Hello.We have 2xEX4550-32F (Virtual Chassis). Below configuration:!admin@EX4550> show configuration routing-instances TESTinstance-type virtual-router;interface xe-0/0/29.0;interface...
View ArticleWrong permissions intermittetnly when using SSH
About 1 out of 4 times when logging we get severely restricted permissions. The workaround is to log out and log back in. However this proving to be very frustrating.
View ArticleClik here to view.
ge-0/1/0 interface vlan configured but showing up in default vlan instead
vlans - Guestvlans - Data Active firewall 192.168.1.25 - LAN interface 1/7 connects to Cisco 2960 gi-1/0/25Passive firewall 192.168.1.26 - LAN interface 1/7 connects to ex2200 ge-0/1/0 interfaceCisco...
View ArticleQinQ configuration cli option errors
We are trying to configure dot1Q config on EX4300, but cli options seems to be missing.EFL license is installed and version is 13.2X51-D35.3 Follow we...
View ArticleHow do configure QinQ scenario where customer-1 and customer-2 use same C...
How do we concieve config following scenario in EX4300 Customer 1 Port ge-0/0/17 - Vlan 1588 Port ge-0/0/18- Vlan 500, 502 Customer 2 Port ge-0/0/19 - Vlan 1588...
View ArticleLACP hashing algorithm on EX4300
Hi I would like to configure LACP hashing algorithm on EX4300. There's no systax for configuring on version 18.1R2.6. Can you give me a configuration template or explain me that it can configure hash...
View ArticleEX 3300 virtual chassis with 6 switches
Does anybody have a diagram of how to connect 6 x EX 3300 in VC ? Setup of VC would be another step. Thank you
View ArticleQFX5100 - mixing families
Hello all, We've got a QFX5100-48S with on a single port 'family ethernet-switching' and 'family inet' configuration.This has worked for a long time, and by committing this configuration back then, the...
View ArticleEX2300 PoE port
So, I am using the CLI to disable and then trying to re-enable the PoE on a port. Do I have the enable command wrong, because it does not change to ENABLE. {master:0}[edit] admin@001# run show poe...
View ArticleEX3400 missing ethernet-switching-options
Unlike the EX3300, EX3400 doesnot seem to have ethernet-switching-options when we can specifiy secure-access-port and limit the amount of mac addresses on an interface.For...
View ArticleLoss a IRB route on EX switch
Hi I found a problem on my switch on last week. I have 5 unit of EX4300 within mix virtual chassis. version is 14.1X53-D30.3 All IRB route is not shown in routing table. I have to reboot it after that...
View ArticleJuniper infrastrukture and IP cameras.
Experts, We are going to expand our infrastructure by adding using 60-90 IP cameras, by adding them to current IDFs and MDF. Creating another vlan for such network is not an issue. The traffic inside...
View ArticlevQFX + OpenNTI Lab
Hello, my plan was to build a Lab with vQFX10k and OpenNTI to test the analytics functinallity. I configured analytics as:root@vqfx-re> show configuration services analytics { streaming-server...
View ArticleSflow config for 4300s
Is there an easy way to include all the interfaces to send sflow data instead of doing set sflow interfaces ge-x/x/x.x for each interface ? I already have the following{master:0} [edit...
View Article