VLAN Translation on Trunk Port
Hi Guys, i try to translate one vlan tag on a Trunk Port. For Example xe-0/1/0.0 is a Trunk port and have 4 vlan tags on it. I need to Translate one tag into another ID outgoing to Interface ge-0/0/0....
View ArticleVXLAN Manual configuration not working (EX4600)
Hello, I'm fairly new to Juniper (a few weeks since I started working with it) and I'm currently trying to manually configure a VXLAN tunnel between 2 EX4600 switches. I started from the bottom, trying...
View ArticlePC isn't able to take DHCP configuration
Please I need your help I have a juniper switch called A connected to a core direct EX 9204 the core has the configuration to enable DHCP rely on a server .some users which connected to switch A and...
View ArticleEX-4300MP Multicast through Virtual Chassis
Greetings everyone, I am experiencing an issue on EX-4300MP series switches. When I configure them in virtual chassis and enable IGMP snooping, it does not seem to pass multicast traffic through the...
View ArticleVerify LAG Hashing
Is there a way on a QFX5100 or EX4300 running JunOS 18.4R2-S3 to verify if two different sessions hashed to different values or the same, given we have all the parameters for the hash calculation...
View ArticleClik here to view.
Can EX 9200 function as a DHCP server and relay agent and the same time
Hello,Can EX 9200 function as a DHCP server and relay agent and the same time ?in other words , can i configure specific subnet for EX to distribute its configuration and other subnets can refer to the...
View Articlesubscriber number
Hi all,There is a number of vlans that has high volume of subscribers on the bng mx. VlanIDs: starting from 100 to 550.The following cli is some times okay for individual check.>show subscribers...
View Articlehow to fetch the forwarder table with SNMP
Hi,I could get the forwarder table after login the EX-switch with the command,# run show ethernet-switching tablevlan5 14:18:77:3d:34:24 Learn 0 ge-0/0/29.0... My question is how to fetch it with SNMP...
View ArticleClik here to view.
MC-LAG design question
Hello experts, First all thanks in advance. I have a question in regards to MC-LAG design. The design is currently for an active-active MC-LAG using VRRP. However, I'm a bit concerned with this design...
View ArticleNo MAC learnt on the port
HiWhile setting up a new VLAN(250) on a bunch of switches today, few devices went offline in another VLAN(170). Looking at the port status, interfaces never flapped. Checked the MAC table and found...
View ArticleiSCSI SAN switch pair, to VC or not to VC?
What are your experiences with using a Virtual Chassis with iSCSI SAN switches? The SAN opinion is the switches should be separate and independent so there are no single points of failure. The Network...
View ArticleCisco Interface Configs to Juniper EX3400 Interface Configs
Hello. Our organization is migrating from Cisco to Juniper. We dont have much time to assimilate to the new syntax so I wanted to reach out to the Juniper Community to see if someone had time to assist...
View ArticleRetaining JUNOS installation package across reboot on EX 4600 Swicthes
Hi everybody, Is there anyway can we retain JUNOS installation files ( packages) pemenantely ( i.e they will survive reboot) on EX SW?Thanks and have a good night!!
View ArticleQFX3500 question about port 1 to 6
Hello,i have 2 qfx3500 and i want to use them as VC but port 1 to 6 and last 6 ports(if i do not be wrong) is marked with white colocr on the chassis, it seems these ports are for special features, can...
View ArticleQFX3500 VirtualCHassis Question
Hello,i want to follow http://tawfique19.blogspot.com/2017/08/configuring-qfx5100-two-members-virtual.html and configure Virtual Chassis between my 2x QFX3500 and my top of rack switch has 2x 10G (one...
View ArticleEVPN-VXLAN End hosts cannot ping l3 gateways on spine switches
Hi allI have a two spine and two leaf setup.I connected my end hosts to both leafs i.e multihomed way.I have configured EVPN-VXLAN on my leaf-spine switches. After configuration I can ping the IRBs...
View ArticleJunos running on VM inside EX4600 switch
Hi everybody,https://www.juniper.net/us/en/products-services/switching/ex-series/datasheets/1000511.pageFeatures and BenefitsEX4600 Ethernet switches include the following key features and...
View Articlevirtual chassis with 4x 10g ?
Hello,i have 2x qfx3500 i want to know can i use 4x 10G ports for virtual chassis and not qsfp port?thnaks,
View Articleconfigur trunk with permit vlan on qfx3500
Hello,i have 2x QFX3500 which configured as VC and i have a router which is connected to both switches and my top of rack switches are connected to these QFX, (every top of rack has 2x 10g , 1x 10g is...
View ArticleFPC 0 PIC 0 port 46 cannot be configured as a virtual chassis port. Only...
Hello,i am trying to configure 2x qfx 3500 as virtual chassis and i have connected port 44-47 qfx #1 to qfx #2 but when i execute request virtual-chassis vc-port set pic-slot 0 port 46 for port from...
View Article