Client getting IPv6 address from both DHCPv6 and SLAAC
I have a setup where I'm trying to just use DHCPv6 for address assignment. I've got the following on my RA and from my understanding "managed-configuration" is supposed to set the M bit and I've...
View Articleroot password won't work over ssh, from console works fine
Running into this issue on a new stack of ex2300 switches. Root access works fine from console, but when I try to ssh across the network I get password errors.Did something change in newer versions of...
View ArticleClik here to view.
stacked-vlan-tagging and Q-in-Q with SRX240 and EX3300
Hello experts, I have the topology that is shown in the attachment. I configured the SRX240 to enable stacked-vlan-tagging and Dual tagged but I have no connectivity between the PC and the SRX240....
View ArticleStrom Control does not work
Hi JuniperI have 2 PC that testing iperf with 401Mbps and configure strom control on ex2300 but port is not shutdown.Below is my configuration, Please help me, Why i generate bandwidth over threshold...
View ArticleELS Junos DHCP attributes
Hi all,You can see some partial ELS Junos dhcp configuration below. But I am trying to understand about "set access address-assignment pool POOL_LAN_11 family inet dhcp-attributes option 242 string...
View Articleconfiguration check-out failed
Hi all,Any idea why it says "configuration check-out failed" #deactivate class-of-service drop-profiles extreme-queue-save{master:0}[edit]ex# show | compare[edit class-of-service drop-profiles]!...
View Articletracing
hi all,The following traceoptions file are left running behind from so long time ago. But there is no ANY size alarm from log messages or partition usage is high alarm from >sho chas alarms....?...
View ArticleEVPN transport customer vlan list
Sorry for disturbing, I want to use EVPN to transport range of customer vlan traffic, but failed for my POC test (EVPN is OK for other vlan but failed for vlan-tunnel ), do you have experience and...
View ArticleICL and ICCP link, what VLAN configuration
Hello,I'm currently working with MC-LAG to get a test environment running. Unfortunately i cant get my head around one part of the configuration. I have 4 switches, two at top and the other two...
View ArticleEX4200 - DHCP relay with vlans
Hey,I'm having trouble getting DHCP relay with vlans to work.I have two vlans, vlan.0(ge-0/0/1) for the dhcp server and vlan.1(ge-0/0/2) for the client that needs to receive the DHCP reply.Looking on...
View Articleparsing the interface has failed
Hi all,The following log consistently is happpening on the ex9200ex. Any ideas?jdhcpd: sdb_subscriber_limit_counter_update : parsing the interface has failed, interface_name=irb : 1222 ThxAr
View Articledc-pfe
Hi,The following log has been consistently occurring 2300ex ver:Junos: 18.2R2-S2.5.....I think it seems relating to pfe, but I am not sure...Any idea or opproach? last message repeated 4 timesdc-pfe:...
View ArticleClik here to view.
vSRX3 firmware 19.1R1.6
Hi Everyone, I've been running a test of vSRX3 version 19.1R1.6 deployed in VMware Workstation 14 Pro. It seems the "ge-*" interfaces not stable or does have compatibility issues. All ge-* interfaces...
View ArticleUsing an EX2300 Switch with a Cable Modem
Good evening, I recently got an EX2300 for use in a small office. I've configured the switch to hand out DHCP addresses to clients on a vlan. The ge-0/0/0 interface is configured to get a DHCP address...
View ArticleFaulty IRB config?
A customer has a network with Virtual Chassis Edge / wiring closets, separated from each other by their own, per wiring closet, vlan. The Edge VC's are connected with a Distribution/Core EX Virtual...
View ArticleClik here to view.
What if VCP port down - QFX5110
Hello, I am having concern about virtual-chassis setup on my qfx5110. Refering to below topology, when the vcp port down, both qfx become "Master". Is this default behavior when "no-split-detection" is...
View ArticleHelp understanding Vlan assignment in Junos
Hi all,I'm fairly new to Juniper and have a question about the way we have to assign ports to vlans. Once the vlan has been set in the switch (EX4200), I assumed the following command was all that was...
View ArticleMejor Alarm Host 1 ECC single bit parity error
Dear All,I am getting "Host 1 ECC single bit parity error" alarm in my Ex8216 switch. If possible, please share possible solution for it.Regards..Umesh Sharma | +91 9007743324bnrumesh@gmail.com
View ArticleRe: J-Net User Ranking and Reward Program Overview
Dear All,I am getting "Host 1 ECC single bit parity error" alarm in my Ex8216 switch. If possible, please share possible solution for it.Regards..Umesh Sharma | +91 9007743324
View Article